Scania showcases Tier 3 16-liter V8

SEPTEMBER 25, 2013 — Scania's 16-liter V8 EPA Tier 3 engine, intended for propulsion and auxiliary use, will be one of two engines showcased at the International Workboat Show in New Orleans, Louisiana.

Scania V8 engines are engineered to produce high power, while maintaining a size that is compatible for auxiliary equipment.  The V design reduces the overall length of the engine which also makes for easy installation. Ancillaries can be effectively accommodated inside the "footprint" of the engine.

Most repairs and servicing can be carried out by a single service technician, since each cylinder has its own head, which together with wet cylinder liners makes for easy overhauls in confined spaces. The camshaft is located high in the block and the timing gears are rear-mounted in order to increase the accuracy of engine timing and reduction of noise.

The output ratings for Scania's newest version of the 16-liter marine propulsion engine range from 550 – 900 hp, and will continue to have outputs between 550 – 1000 hp for use in international and exempt markets.

For auxiliary applications the range for EPA Tier 3 is 468 kW – 553 kW, and the current range will continue to be offered between 430 kW - 596 kW for international and exempt markets.

Scania says that an increase can be expected in the V8 output ratings in keel cooled applications.

Extended maintenance intervals

Scania's centrifugal oil cleaner effectively removes small particles from the lubrication oil, while reducing the size of the replaceable filter cartridge. The Scania saver ring, placed at the top of each cylinder liner, reduces carbon deposits on the edge of the piston crown and reduces cylinder liner wear. In spite of higher performance and tighter emission levels, Scania has been able to increase maintenance and oil change intervals by 25 percent (now 500 hours) in comparison to its predecessor.

Instrumentation optional

Scania also has a new type-approved instrumentation that facilitates installation via a user-friendly and flexible web interface; the marine operator can adapt the information on the displays and choose any required data to be shown. There are program templates for water temperature, engine speed, oil pressure and fuel consumption.

In-house development

The new engine range has been designed for high strength and durability. Many components are shared across the range, a factor that facilitates a reduction in parts supply, since it significantly eliminates the number of unique parts used for each engine. The modular architecture and common work methods simplify training in Scania's service network, while maximizing uptime for users.

Scania secures control of all strategic steps in development and performance control. Basic engine development and manufacturing as well as the development of engine management, fuel injection and emission control systems are all carried out in-house. This strategy is motivated by performance and fuel economy demands and targets, as well as by the need to secure consistent environmental performance, robustness and convenience of operation.

Key characteristics of Scania's 16-liter V8 engine

  • Enhanced environmental performance and consistently improved fuel economy
  • Easy-to-service architecture with individual cylinder heads
  • Modular design across the range facilitates a reduction of parts supply and servicing
  • Scania engine management system – performance can be tailored to each task
  • Type approved

Engine performance – auxiliary power

Power 468 - 553 kW at 60 Hz

Engine performance – propulsion power

Power 550 - 900 hp

405 - 662 kW

Engine dimensions, 16-liter V8

Swept volume:16.4 liters
Length: 61 in
Width: 49 in
Height: 48 in

Dry weights, 16-liter V8

With heat exchanger 3,682 Ib
With keel cooling 3,527 Ib

25 September 2013
[ad-side]
[ad-side]
[ad-side]
[ad-side]
[ad-side]
[ad-side]
[ad-side]
[ad-side]
[ad-side]
[ad-side]